• <nav id="es4k2"></nav>
  • <menu id="es4k2"></menu>
    <xmp id="es4k2"><nav id="es4k2"></nav>
    <xmp id="es4k2"><nav id="es4k2"></nav><menu id="es4k2"></menu><xmp id="es4k2">
    <nav id="es4k2"></nav>
    產品中心您的位置:網站首頁 > 產品中心 > Millipore產品 > 過濾器 > CVGL72TP3 CTGR71TP1默克Millipore密理博Durapore濾芯CVHL72TP3

    默克Millipore密理博Durapore濾芯CVHL72TP3

    簡要描述:
    默克Millipore密理博Durapore濾芯CVHL72TP3 CVGL72TP3 CTGR71TP1,有效去除膠體和顆粒污染物。Durapore濾芯在制造過程中進行了100%的完整性測試,以確保完整性。Durapore親水濾芯由聚偏氟乙烯(PVDF)膜與纖維素酯(RW06)預過濾層制造,更大的通量和聚丙烯組件,廣泛的化學相容性。

    更新時間:2021-08-30

    訪問量:344

    廠商性質:代理商

    生產地址:

    品牌其他品牌

    默克Millipore密理博Durapore濾芯CVHL72TP3 CVGL72TP3 CTGR71TP1

    有效去除膠體和顆粒污染物。Durapore濾芯在制造過程中進行了100%的完整性測試,以確保完整性。Durapore親水濾芯由聚偏氟乙烯(PVDF)膜與纖維素酯(RW06)預過濾層制造,更大的通量和聚丙烯組件,廣泛的化學相容性。

    Description
    Catalogue NumberCVHL72TP3
    Trade Name
    • Durapore®

    DescriptionDurapore® Cartridge Filter with prefilter 20 in. 0.45 µm Code 7


    Product Information
    Device ConfigurationCartridge
    Maximum Differential Pressure, bar (psid)Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 3.5 bar (50 psid) @ 25 °C
    Cartridge CodeCode 7 (2-226) O-rings w/locking-tabs
    Good Manufacturing PracticesThese products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
    Prefilter MaterialMixed Cellulose Esters (MCE)
    Quality LevelMQ400


    Biological Information
    Bacterial EndotoxinsAqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
    MediaDurapore® w/Prefilter
    SterilityOther
    Sterilization10 SIP cycles of 30 min or 10 autoclave cycles of 60 min @ 121 °C
    WettabilityHydrophilic


    Physicochemical Information
    Pore Size0.45 µm
    Air Diffusion at 23 °C≤30 mL/min @ 1.5 bar (22 psig) in water
    Bubble Point at 23 °C≥1930 mbar (28 psig) air with water
    Gravimetric ExtractablesThe extractables level was equal to or less than 45 mg per 10-inch cartridge after 24 hours in water at controlled room temperature.
    Indirect Food AdditiveAll component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. All component materials meet the requirements of the EU framework regulation [1935/2004/EC] regarding materials and articles intended to contact food.
    Non-Fiber ReleasingThis product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
    USP Bacterial EndotoxinsA sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.


    Dimensions
    Cartridge Nominal Length20 in. (50 cm)
    Diameter6.9 cm (2.7 in.)
    Filtration Area1.38 m2
    Device Size20 in.


    Materials Information
    Chemistry
    • Polyvinylidene Fluoride (PVDF)

    Device Material
    • Polypropylene

    Seal MaterialSilicone (SI)
    Support MaterialPolypropylene


    Packaging Information
    Material Size3
    Material PackageDouble Easy-Open bag


    Specifications
    Oxidizable SubstancesWill meet the USP Oxidizable Substances Test requirements after a water flush of ≥2 L


    規格

    OptiScale® and Millipak® Capsules

    OptiScale® 25 CapsulesOptiScale® 47 CapsulesMillipak® 100Millipak® 200
    Nominal Dimensions
    Maximum length:39 mm (1.52 in.) with female Luer-Lok inlet/male Luer-Lok outlet82 mm (3.24 in.) with flange inlet/hose barb outlet
    74 mm (2.91 in.) with flange inlet/flange outlet
    94 mm (3.70 in.) with hose barb inlet/hose barb outlet
    13 cm (5.1 in.)15.5 cm (6.1 in.)
    Diameter:31 mm (1.21 in)69 mm (2.75 in.)7.6 cm (3.0 in.)
    Weight:0.19 oz (5.5 g)2.3 oz (67 g)
    Filtration Area3.5 cm217.7 cm2500 cm2 (0.54 ft2)1000 cm2 (1.08 ft2)
    Materials of Construction
    Filter membrane:Hydrophilic polyvinylidene fluoride (PVDF)
    Structural components:PolypropylenePolycarbonate
    Supports:PolypropylenePolycarbonate
    Vent caps:PolypropylenePolyvinylidene fluoride (PVDF)
    Internal seal rings:Fluoroelastomers
    Housing VentCapped Vent with female Luer connections on inlet side of device.Adjustable vent with male luer and female Luer-Lok connections on inlet side of device.
    Maximum Inlet Pressure4.1 bar (60 psig) at 25 °C5.5 bar (80 psig) at 25 °C5.2 bar (75 psig) at 25 °C
    Maximum Differential Pressure
    Forward:4.1 bar (60 psig) at 25 °C5.5 bar (80 psig) at 25 °C4.1 bar (60 psid) at 25 °C
    1.7 bar (25 psid) at 80 °C
    345 mbar (5 psid) at 123 °C
    Reverse:0 bar (0 psig)0.7 bar (10 psig) at 25 °C690 mbar (10 psid) at 25 °C
    Bubble Point at 23 °C≥ 1790 mbar (26 psig) air with water
    Gravimetric ExtractablesAfter autoclaving and a 24-hour soak in ASTM Type 1 reagent grade water at controlled room temperature:

    ≤ 2.5 mg≤ 5.0 mg
    Bacterial EndotoxinAqueous extraction containsAqueous extraction contains
    Oxidizable SubstancesMeets the requirements of the USP Oxidizable Substance Test after a water flush of:

    ≤ 100 mL200 mL200 mL
    TOC/ConductivityThis product exhibited less than 500 ppb TOC per USP<643>and less than 1.3 µS per USP<645>after autoclave and a WFI water flush of 15 mL.
    SterilizationMay be autoclaved for 1 cycle of 60 minutes at 123 °CMay be autoclaved for 3 cycles of 60 minutes at 126 °CMay be autoclaved for 3 cycles of 90 minutes at 123 °C. Capable of 45 kilogray (4.5 Megarad) gamma exposure (cannot be steam sterilized in-line).
    Good Manufacturing PracticesThese products are manufactured in a Millipore facility which adheres to FDA Device Good Manufacturing Practices.
    Non-Fiber ReleasingDurapore membrane meets the criteria for a “non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
    Component Material ToxicityComponent materials meet the requirements of USP<88>Reactivity Test for Class VI Plastics. This product is non-toxic per the current USP<88>Safety Test.
    Indirect Food AdditiveThe Durapore membrane used in these products meets the FDA Indirect Food Additive requirements cited in 21 CFR 177.2910. All other components meet the FDA Indirect Food Additive requirements cited in 21 CFR 177 – 182.
    Opticap® XL Capsules and Cartridge Filters

    Opticap® XL 2Opticap® XL 4Opticap® XL 5Opticap® XL 10Cartridge (per 10-inch element)
    Nominal Dimensions
    Maximum length:14.2 cm (5.6 in.)19.6 cm (7.7 in.)21.6 cm (8.5 in.)33.5 cm (13.2 in.)
    Diameter:8.4 cm (3.3 in.)10.7 cm (4.2 in.)6.9 cm (2.7 in.)
    Filtration Area0.09 m2 (0.93 ft2)0.19 m2 (2.09 ft2)0.35 m2 (3.7 ft2)0.69 m2 (7.4 ft2)
    Materials of Construction
    Filter membrane:Hydrophilic PVDF
    Prefilter media:Mixed esters of cellulose
    Film edge:Polypropylene
    Structural components:Polypropylene
    Supports:Polypropylene
    Vent O-rings:Silicone
    O-rings:Silicone
    Vent/Drain? in. hose barb with double O-ring seal
    Maximum Inlet Pressure5.5 bar (80 psi) at 23 °C
    2.8 bar (40 psi) at 60 °C
    1.0 bar (15 psi) at 80 °C
    Maximum Differential Pressure
    Forward:5.5 bar (80 psid) at 25 °C (with prefilter)
    1.0 bar (15 psid) at 80 °C (with prefilter)
    3.4 bar (50 psid) at 25 °C (without prefilter)
    5.5 bar (80 psid) at 25 °C
    1.8 bar (25 psid) at 80 °C
    345 mbar (5 psid) at 135 °C
    Reverse:3.4 bar (50 psid) at 25 °C, intermittent3.5 bar (50 psid) at 25 °C, intermittent
    Bubble Point at 23 °C≥ 1930 mbar (28 psig) air with water
    Air DiffusionThrough a water wet membrane at ambient temperature at 1.5 bar (22 psi):Through a water wet membrane at 23 °C at 1.5 bar (22 psi):

    ≤ 4.5 cc/min≤ 7.5 cc/min≤ 15 cc/min
    Gravimetric ExtractablesAfter autoclaving and a 24-hour soak in ASTM Type 1 reagent grade water at controlled room temperature:
    With prefilter:≤ 50 mg≤ 45 mg
    Without prefilter:≤ 10 mg≤ 15 mg≤ 25 mg≤ 20 mg
    Bacterial EndotoxinAqueous extraction contains < 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test.
    Oxidizable SubstancesMeets the requirements of the USP Oxidizable Substance Test after a water flush of:

    500 mL1000 mL
    Sterilization (with Prefilter)
    Autoclaved:3 cycles of 60 minutes at 121 °C.10 cycles of 60 minutes at 121 °C
    Steam Sterilization:Cannot be steam sterilized in-line.10 cycles of 30 minutes at 121 °C
    Hot Water Sanitization:30 cycles of 30 minutes at 80 °C
    Sterilization (without Prefilter)
    Autoclaved:3 cycles of 60 minutes at 126 °C30 cycles of 60 minutes at 126 °C
    Steam Sterilization:Cannot be steam sterilized in-line.30 cycles of 30 minutes at 135 °C
    Hot Water Sanitization:30 cycles of 30 minutes at 80 °C
    Total Organic Carbon (TOC)/ConductivityAutoclaved filter effluent meets the WFI requirement of USP<643>, for Total Organic Carbon and USP<645>for Water Conductivity at 25 oC after a WFI flush of 11.5 L
    Good Manufacturing PracticesThese products are manufactured in a Millipore facility which adheres to FDA Good Manufacturing Practices.
    Non-Fiber ReleasingDurapore membrane meets the criteria for a “non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
    Component Material ToxicityComponent materials were tested and meet the criteria of the USP<88>Reactivity Test for Class VI Plastics. Sterilizing-grade Durapore Filters are non-toxic per the current USP<88>Safety Test.
    Indirect Food AdditiveDurapore membrane meets the FDA Indirect Food Additive requirements cited in 21 CFR 177.2910. All other component materials also meet the FDA Indirect Food Additive requirements cited in 21 CFR 177 – 182.
    European Pressure Equipment DirectiveMillipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Equipment Directive, this product does not bear the CE mark.

    CVHL01TP3 CVHL02TP3  CVHL03TP3  CVHL01PP3   CVHL02PP3   CVHL03PP3  CVHL51TP3  CVHL52TP3 CVHL53TP3  CVHL51PP3  CVHL52PP3  CVHL53PP3 CVHL71TP3 CVHL72TP3  CVHL73TP3 CVHL71PP3 CVHL72PP3 CVHL73PP3 CVHL75PP1 CTGR01TP1 CTGR02TP1  CTGR03TP1 CTGR71TP1 CTGR72TP1  CTGR73TP1  CTGR75S01 KTGRA02FF3 KTGRA02HH3 KTGRA02TT3 KTGRA04FF3 KTGRA04HH3 KTGRA04TT3  KTGRA05HH1 KTGRA05TT1 KTGRA10FF1 KTGRA10HH1 KTGRA10TT1 CVGL01TP3 CVGL02TP3 CVGL03TP3 CVGL51TP3 CVGL52TP3 CVGL53TP3 CVGL71TP3 CVGL73TP3 CVGL75S01 CVVL01TP3 CVVL02TP3 CVVL03TP3  CVVL51TP3 CVVL52TP3 CVVL53TP3 CVVL71TP3 CVVL72TP3 CVVL72TP3 CVVL75S01 CVDI01TPE CVDI02TPE CVDI03TPE CVDI71TPE CVDI72TPE CVDI73TPE CVDI01TPS CVDI02TPS CVDI03TPS CVDI71TPS CVDI72TPS CVDI73TPS

    默克Millipore密理博Durapore濾芯CVHL72TP3 CVGL72TP3 CTGR71TP1


    留言框

    • 產品:

    • 您的單位:

    • 您的姓名:

    • 聯系電話:

    • 常用郵箱:

    • 省份:

    • 詳細地址:

    • 補充說明:

    • 驗證碼:

      請輸入計算結果(填寫阿拉伯數字),如:三加四=7

    聯系我們

    contact us

    咨詢電話

    15216781845

    掃一掃,關注我們

    返回頂部




    无码专区国产精品第一页
  • <nav id="es4k2"></nav>
  • <menu id="es4k2"></menu>
    <xmp id="es4k2"><nav id="es4k2"></nav>
    <xmp id="es4k2"><nav id="es4k2"></nav><menu id="es4k2"></menu><xmp id="es4k2">
    <nav id="es4k2"></nav>
    掃一掃訪問手機站掃一掃訪問手機站
    訪問手機站